To
ensure what is firmware used by your device, you can check by go to
Setting ->About -> Software Information ->Build Number
Quote:
TUTORIAL
+ At the first time, please Install driver for Lenovo A319 that already downloaded before.
+ Extract the other downloaded file (firmware and flash tool) save in anywhere on your hard drive.
+ Then remove your back case, battery, sim card and SD Card if installed
+ Next, Connect your Lenovo A319 to Computer, while holding the power
button and volume up. The PC will detect the new hardware, just ignore
it.
+ Then, release USB data cable from the PC.
+ Open SP flash tool software (for windows 7 you can run it by
administrator) and + click scatter load. find Lenovo A319 scatter
storage location earlier.
+ In the Scatter Loading field go to the folder where you extracted the Flash Tool and select MT6752_Android_scatter.txt
+ Then you click options ->Download -> then check DA DL all with checksum.
+ On download tab, ensure you have selected download only option from dropdown menu, see below picture.
+ Then, click download button on top right and connect your Lenovo A319 with USB cable in phone switch off position.
+ Process will run automatic, and you can see the red stripe showing download percentage at bellow
+ When your process complete, you can see a green circle with tick mark.
+ Now disconnect your Lenovo A319
+ Intall you battery again.
+ Then, start your Lenovo A319. (remember, on the first booting it will take a long time to start)
0 comments:
Post a Comment