New huawei y220-u00 flash procedure was 100% but after flashing phone wont switch on

huawei y220-u00 flash procedure was 100% but after flashing phone wont switch on

---

huawei y220-u00 flash procedure was 100% but after flashing phone wont switch on

flash with different flash Y220-U00

Y220-U00 V100R003C98B202SP01_Firmware_Ghana_MTN_Andriod 2.3.6_na_05021KJT

Y220_U00_Firmware_Singapore_Others_Android 2.3.6_05021LCHU00V100R001C519B200SP02

Flash files count is :9

Action : Firmware update.

Selected Huawei: Ascend Y220-U00

Exe version: NCKDongle AndroidMTK 2.5.6.2

Scenario: Safe Flash

Reinsert phone battery.

Battery must be charged.

Phone must be off with battery inside.

Please insert USB cable now...

Detected : MediaTek PreLoader USB VCOM (Android) (COM11)

Phone detected...Please wait

Sending DA agent, please wait...

BaseBand CPU :MT6572_S00

BaseBand CPU Secure Version : FF

BaseBand CPU Bootloader Version : 01

----------------------------------------------------

INT RAM: 128 KB SDRAM

EXT RAM: 256 MB DRAM

----------------------------------------------------

NAND: (4Gb+2048Mb) [KINGSTON] KTN0403CS_TCR1

BOOT STYLE : NAND BOOT

Size: 0x20000000 [0.500 GB]

BlockSize: 4096 SpareSize: 224 BMT Blocks 80

Detecting high speed port, wait......

If driver not installed, install high speed port driver.

If not need high speed port, disable it.

After repeat opperation.

Detecting high speed port, wait......

Detected : DA USB VCOM Port (COM15)

Warning, flashing preloader disabled!

If you change android version, preloader must be flashed.

Flash NAND Algo Start.

Start dumping nvram, wait.......

Saved to : C:\NCK Dongle\AndroidMTK\backup\y220_02_01_2016_16_17_46

Download firmware to flash now...

Wait untill phone will start charging.