Karbonn A6 Turbo Dead solution Flash File Free Download Here
Pocket-friendly Android smartphone
Display and Configuration
The
Karbonn A6 Turbo sports a 4.5-inch LCD multi touch display with a
resolution of 480 x 854 pixels and a pixel density of 218ppi. It takes
design cues from Sony's Xperia series and sails on Android v4.4 KitKat
OS. Doing duty on the inside is a 1.3GHz dual-core processor paired with
a paltry 51MB RAM which will pose problems during even standard
multitasking.
Camera and Storage
In
the camera department, the Karbonn A6 Turbo is armed with a 5MP unit
and LED flash at the back besides a 0.3MP snapper at the front. It
features a standard inbuilt storage unit of 4GB which is further
expandable up to 32GB via microSD slot.
Battery and Connectivity
The
Karbonn A6 Turbo sips juice from a 1,500mAh Li-ion battery which is
rated to deliver up to 4 hours of talktime and up to 78 hours of standby
time over 2G. On the connectivity front, it supports features like
GPRS/EDGE, 3G, Wi-Fi, USB port, Bluetooth and dual SIM slots.
Verdict
The
Karbonn A6 Turbo is a dual SIM Android KitKat powered handset for those
who don't want to spend much in buying a smartphone. It shows
resemblance with Sony's Xperia models in terms of design.
+8801910553340
+8801725000669
+8801725000669
somadhantelecom@yahoo.com
Download Here
How to Flash
Download Here
Step 1: Download and extract the stock firmware on your computer.
Step 2: After extracting you will find the SP Flash Tool, Driver and instruction manual.
Step 3: Install the USB Drivers (skip if drivers are already installed).
Step 4: Open the SP Flash Tool and load the Scatter File from the firmware folder.
Step 5: Connect your Smartphone to the computer using the USB Driver.
Step 6: Click on Upgrade / Download Button in the SP Flash Tool to Begin the Flashing.
Step 7: Green Ring will appear at the end of successful Flash.
Important Notes:[*] Take a Backup of your personal data before flashing or installing the firmware on your smartphone. As this helps you to recover the personal data whenever any thing wrong happens.
How to Flash
Download Here
Step 1: Download and extract the stock firmware on your computer.
Step 2: After extracting you will find the SP Flash Tool, Driver and instruction manual.
Step 3: Install the USB Drivers (skip if drivers are already installed).
Step 4: Open the SP Flash Tool and load the Scatter File from the firmware folder.
Step 5: Connect your Smartphone to the computer using the USB Driver.
Step 6: Click on Upgrade / Download Button in the SP Flash Tool to Begin the Flashing.
Step 7: Green Ring will appear at the end of successful Flash.
Important Notes:[*] Take a Backup of your personal data before flashing or installing the firmware on your smartphone. As this helps you to recover the personal data whenever any thing wrong happens.
Karbonn A6 turbo v15.0 Dead solution plZzzz
ReplyDelete