Q Mobile T300 How to Monyka Virus Remove Here 100%

Q Mobile T300 Virus

---

Q MOBILE T300 SPD 7731GEA Virus MONKEY TEST TIME SERVICE AND MANY MORE VIRUSES......

ANY SOLUTION?

Start at : [2/8/2016 / 8:03:10 AM]
Operation : Read FullFlash [ v1.13 ]

1. Remove battery. Insert battery back
2. Press and hold 'VolumeUp' and 'VolumeDown' keys
3. Insert cable

==== Wait for phone...

Phone found! [ 118 ]
Port Opened
Sync...
InitBoot Done [ 0x81 ] , Ver : SPRD3
Sync...
Sending FDL
[Info] : If SW freeze here more, than 15 seconds - remove cable
FDL Ready!
Boot Ver : SC773x Android 5.x eMMC v1.0 Inf
Sending FLASH FDL
FLASH FDL Ready!
Boot Ok!

FlashMode Set : Ok!
Detected eMMC Flash , Structure detect Ok!

[FW_READER] : Step #1 Passed!
[FW_READER] : Step #2 Passed!
[FW_READER] : Step #3 Passed!

Phone found! [ 118 ]
Port Opened
Sync...
InitBoot Done [ 0x81 ] , Ver : SPRD3
Sync...
Sending FDL
[Info] : If SW freeze here more, than 15 seconds - remove cable
FDL Ready!
Boot Ver : SC773x Android 5.x eMMC v1.0 Inf
Sending FLASH FDL
FLASH FDL Ready!
Boot Ok!


Model Name : scx35_sp7731gea_lmplus_dt
Model Brand : QMobile
Model Device: scx35_sp7731gea_lm
AndrVersion : 4.4.2
BaseBand CPU: SP7731GEA_LM
Project Ver : QMobileT300_MP_29_04
Model Ext : QMobile T300

[Read Mode] : HSUSB : 0x3000

[FW_READER] : Reading Firmware Now ...

[Read Ok] : u-boot-spl-16k.bin
[Read Ok] : u-boot.bin
[Read Ok] : prodnv.img
[Read Ok] : sc7731g_CP0_modem.bin
[Read Ok] : DSP_DM_Gx.bin
[Read Ok] : nvitem_w.bin
[Read Ok] : sc7731g_modem_CP2_WCN_14E_W15.16_Release.bin
[Read Ok] : nvitem_wcn.bin
[Read Ok] : logo_480x800.bin
[Read Ok] : fblogo_480x800.bin
[Read Ok] : boot.img
[Read Ok] : system.img
[Read Ok] : cache.img
[Read Ok] : recovery.img
[Read Ok] : userdata.img

Firmware Size : 888 MiB
Saved to : C:\InfinityBox\CM2SPD\Models\T300\SP7731GEA_LM_scx 35_sp7731gea_lm_4.4.2_QMobileT300_MP_29_04\
Done!

Elapsed: 00:08:22

Reconnect Power/Cable!

Plz Also Chk This
Qmobile M95 SP7731GEA Firmware
Infected With Some Se*y Virus...
****_Virus_Infected_SP7731GEA_scx35_sp7731gea_4.4. 3_KOT49H_14B_test-keys_QMobile_M95.part1
****_Virus_Infected_SP7731GEA_scx35_sp7731gea_4.4. 3_KOT49H_14B_test-keys_QMobile_M95.part2

Code:

Operation : Read FullFlash [ v1.14 ] 1. Remove battery. Insert battery back 2. Press and hold 'VolumeUp' and 'VolumeDown' keys 3. Insert cable ==== Wait for phone... Phone found! [ 23 ] Port Opened Sync... InitBoot Done [ 0x81 ] , Ver : SPRD3 Sync... Sending FDL [Info] : If SW freeze here more, than 15 seconds - remove cable FDL Ready! Boot Ver : SC773x Android 5.x eMMC v1.0 Inf Sending FLASH FDL FLASH FDL Ready! Boot Ok! FlashMode Set : Ok! Detected eMMC Flash , Structure detect Ok! [FW_READER] : Step #1 Passed! [FW_READER] : Step #2 Passed! [FW_READER] : Step #3 Passed! Phone found! [ 23 ] Port Opened Sync... InitBoot Done [ 0x81 ] , Ver : SPRD3 Sync... Sending FDL [Info] : If SW freeze here more, than 15 seconds - remove cable FDL Ready! Boot Ver : SC773x Android 5.x eMMC v1.0 Inf Sending FLASH FDL FLASH FDL Ready! Boot Ok! Model Name : scx35_sp7731geaplus_dt Model Brand : QMobile Model Device: scx35_sp7731gea AndrVersion : 4.4.3 BaseBand CPU: SP7731GEA Project Ver : KOT49H 14B_test-keys Model Ext : QMobile M95 [Read Mode] : HSUSB : 0x3000 [FW_READER] : Reading Firmware Now ... [Read Ok] : u-boot-spl-16k.bin [Read Ok] : u-boot.bin [Read Ok] : prodnv.img [Read Ok] : nvitem_w.bin [Read Ok] : nvitem_wcn.bin [Read Ok] : sc7731g_CP0_modem.bin [Read Ok] : DSP_DM_Gx.bin [Read Ok] : sc8830g_modem_CP2_WCN_14D_W15.16_Release.bin [Read Ok] : logo_540x960.bin [Read Ok] : fblogo_540x960.bin [Read Ok] : boot.img [Read Ok] : system.img [Read Ok] : cache.img [Read Ok] : recovery.img [Read Ok] : userdata.img AndroidInfo created Firmware Size : 1243 MiB Saved to : C:\Users\masterRt1994\Documents\SP7731GEA_scx35_sp7731gea_4.4.3_KOT49H_14B_test-keys_QMobile_M95\ Done! Elapsed: 00:07:56