How to samsung SM-G925T 5.1.1 Auto root Function

samsung SM-G925T 5.1.1 Auto root Function

---

chimera tool support samsung edge fw 5.1.1 root function ?

Functions supported:

• Read Codes

• SW Change

• Root/Unroot

• Read / Write certificate

• Restore / Store backup

• Info

If you cant root, send a message to supported chimera tool or use this:

If you plan on using the Unikernel to root your g925t or g920t on 5.1.1 use these steps:

1. Install Samsung USB Drivers if necessary.

2. Put phone into download mode. Power phone off then press and hold Volume down, home and power keys at same time until you see warning screen then let go and hit volume up one time.

3. Plug phone in and wait for drivers to install if necessary.

4. Open odin you should now see phone’s modem port highlighted in blue.

5. Click on BL tab and select correct sboot.bin that you downloaded above. Then click start.

6. When phone comes back on power off again and put into download mode.

7. Open odin again and this time select AP tab and select UniKernel file and click start.

8. That is it!!! When it comes back on phone will be rooted. To verify that knox has not been tripped go back to download mode and it should still say KNOX WARRANTY: 0 (0X0000)

If you plan on using Aou’s Kernel and TWRP to root your G925T on 5.1.1 (DO NOT USE THIS FOR G920T) use the steps below:

1. Install Samsung USB drivers if necessary.

2. Copy and Paste SuperSU v2.49 on the root folder of your phone’s internal memory.

3. Put phone into download mode. Power phone off then press and hold Volume down, home and power keys at same time until you see warning screen then let go and hit volume up one time.

4. Plug phone into computer and let drivers install if necessary.

5. Open odin and click on BL tab and select sboot.bin file for g925t and click start.

6. When phone is back on put back into download mode again.

7. Open odin again and this time select AP tab and flash Aou’s TWRP file and hit start.

8. When phone is back on put phone into download mode one last time.

9. Open odin and select AP tab and select Aou’s v4 kernel and click start.

10. When phone is back on unplug it and power it off and put into recovery mode (Volume up, home and power keys)

11. When TWRP recovery is open click on install tab and select supersu file and swipe to flash it. then reboot phone to system.

12. That is it!!! When it comes back on phone will be rooted. To verify that knox has not been tripped go back to download mode and it should still say KNOX WARRANTY: 0 (0X0000)

SM-G925T_5.0.2
http://www.4shared.com/zip/952bf-Rjb...mo-zerolt.html Root By Odin